Are you a CCNA looking to refresh your Ninja Networking Skills? Are you studying to become Juniper Certified? Have fun with this quiz involving the TCP/IP and OSI models, routers versus switches, and collision versus broadcast domains!
Check out my latest Juniper training course at CBT Nuggets!
How did you score? Let us know in the comments section below!
JNCIA-Junos OSI and Things That Use It Quiz
This quiz hits the TCP/IP and OSI Models, routers and switches, and the concept of collision domains and broadcast domains. Enjoy!
Start
Congratulations - you have completed JNCIA-Junos OSI and Things That Use It Quiz.
You scored %%SCORE%% out of %%TOTAL%%.
Your performance has been rated as %%RATING%%
Your answers are highlighted below.
Question 1
Which of the following statements are correct regarding broadcast versus collision domains? Choose all that apply.
A
A VLAN permits a broadcast domain to scale across multiple physical devices
B
Broadcast frames are first sent to a gateway device, and then propagated to all other devices in the segment
C
Broadcasts are always constrained to a single physical network device, hubs are an exception
D
Broadcasts are sent using a special broadcast address that all stations "listen on"
Question 1 Explanation:
Remember, while network devices can constrain broadcasts, VLANs used across switches can actually ensure that broadcast frames are propagated across switches.
Question 2
You have a Juniper switch that contains three VLANs. Which statement is true about this device?
A
The switch will always flood broadcast frames between the three VLANs
B
The switch will flood a broadcast into the same VLAN where it was created
C
A router is used to flood the broadcast frame into all of the VLANs
D
Each VLAN requires the same default gateway configured for proper inter-VLAN communication
Question 2 Explanation:
One of the purposes of the VLAN is to constrain broadcast traffic to the single VLAN.
Question 3
A hub is still being used in a network run by a very nostalgic engineer. He has connected two servers and four workstations to this device. How many collision domains are there?
A
Four
B
Six
C
One
D
Two
Question 3 Explanation:
Remember, the challenge with a hub is one large collision domain for all the connected devices. This requires a half duplex configuration of the devices, and results in collisions in the network.
Question 4
Which are elements you can expect should there be a collision in your Ethernet network? Choose two.
A
A jam signal
B
A retransmission by the default gateway
C
A central arbitrator intervention
D
A retransmission after a random backoff
Question 4 Explanation:
CSMA/CD uses a jam signal to notify devices of a collision as well as a random backoff timer to control retransmissions.
Question 5
You have a Juniper router connected to the Internet and two switches. Each switch connects to five hosts. How many collision domains exist in this network?
A
11
B
12
C
1
D
13
Question 5 Explanation:
There is a collision domain created in this topology between each network device. 1 for the Internet connection. 2 for the two connections to the switches, and ten collision domains for each of the hosts.
Question 6
Segments are the PDU for which layer of the OSI model?
A
Physical
B
Transport
C
Network
D
Data Link
Question 6 Explanation:
From the bottom up - it is Bits, Frames, Packets, Segments.
Question 7
Which layer of the TCP/IP model ensures that packets are routed to logical addresses?
A
Host-to-Network
B
Data Link
C
Internet
D
Application
E
Transport
Question 7 Explanation:
The Internet layer is the equivalent of the Network layer in the OSI model.
Once you are finished, click the button below. Any items you have not completed will be marked incorrect.
Get Results
There are 7 questions to complete.
←
List
→
Return
Shaded items are complete.
1
2
3
4
5
6
7
End
Return
You have completed
questions
question
Your score is
Correct
Wrong
Partial-Credit
You have not finished your quiz. If you leave this page, your progress will be lost.
Enjoy this latest quiz and let me know how you scored in the comments section here!
CCENT (100-101 ICND1) Sample Quiz 1
Enjoy this sample quiz where subnetting is the focus!
Start
Congratulations - you have completed CCENT (100-101 ICND1) Sample Quiz 1.
You scored %%SCORE%% out of %%TOTAL%%.
Your performance has been rated as %%RATING%%
Your answers are highlighted below.
Question 1
The decimal number 205 converted into a binary number is _____.
A
11011101
B
11001101
C
110001019
D
11000101
Question 2
What is the decimal equivalent of the binary number 11000111?
A
218
B
199
C
179
D
208
Question 3
Using six subnet bits, how many usable subnets are created?
A
58
B
62
C
64
D
128
Question 4
What is the last usable host address on the third subnet for the following address and mask combination - 192.168.1.0 255.255.255.248?
A
192.168.1.24
B
192.168.1.23
C
192.168.1.25
D
192.168.1.22
Once you are finished, click the button below. Any items you have not completed will be marked incorrect.
Get Results
There are 4 questions to complete.
←
List
→
Return
Shaded items are complete.
1
2
3
4
End
Return
You have completed
questions
question
Your score is
Correct
Wrong
Partial-Credit
You have not finished your quiz. If you leave this page, your progress will be lost.